The system has 2 safety mechanisms which stop the walker should a horse become entangled.
#1 the adjustable bolt which is used on the direct drive allows the friction break to stop the walker.
#2 The frequency converter cuts out when a certain resistance is reached also stopping the drive.

The basic walker construction can always be extended at a later time to train more horses or increase the diameter.
The drive unit is provided by one or two electrical motors (750 W/each) depending on size and the number of horses .

For the assembly of the system, a concrete foundation slab, 5´-7” x 5´-7” x 2´-8” is required. The engineer drawings are provided by equiline.

An 2" piece of flexi tubing should be laid from the centre of the concrete slab to the perimeter of the walker, the presumed position of the controls. This allows the electrical cables to be passed through under ground.
The motors run on 220-230V 50-60 Hz. That means they work in the States


Please contact us for a free quote, we provide a full service including full installation, hands on foreman, hot line service and full engineer drawing.


More about our Horse Walkers: HORSE-WALKER.PDF